An innovative corrosion protection layer as a part of paint applications
Meet the CB300
Simplifies surface preparation while creating an additional protective layer under the paint system, ensuring exceptional corrosion resistance and significantly reducing costs.
Features & Benefits
Provides additional protection to the metal
Extends maintenance intervals
Eliminates the need for abrasive surface preparation
Enables a reduced total thickness of the final system
Water-based products, ready to use without dilution
Fast curing through a wide range of temperatures
ESG tangible value
Cross-sectional image from a scanning electron microscope
Application
Air Spray
Airless
Brush
Suface Preparation
The surface must be free from loose particles and oils before application.
Wash thoroughly. If needed, use high-pressure water equipment to remove loose particles.
Wash with water using high-pressure equipment if needed to remove loose particles or wash thoroughly with fire hose
Clean until all loose rust and old paint has been removed.
If needed use powered or hand brush on difficult spots.
Clean the surface to remove dust, grease or general dirt, we recommend to use degreaser as a grease removal.
After preparation & before applying, make sure there is no water on the surface.
Applying CB300
Apply one thin layer of CB300, up to 50-70 microns wet, without overcoating. Make sure that the applied surface is not above 60 Degrees Celsius.
Topcoat
After the CB300 has been applied and dried, wait at least 1 hour before applying the mid coat and the top coat.
Please consult us about the type of mid coats and top coats recommended. The mid and top coat applications are according to the specific manufacturer’s instructions.
Industries:
Transmission
Piping
Infrastructure
Products
Infrastructure
Maintenance
Mining
Applications
Gas & Oil
Applications
Marine
Industry
Oil Storage
Facilities
